Guangzhou Freego Digital Technology Co., Ltd.
Main products:Battery,Battery Charger,Bicycle Battery
Products
Contact Us
  • Contact Person : Ms. Li Mandy
  • Company Name : Guangzhou Freego Digital Technology Co., Ltd.
  • Tel : 86-20-22077307
  • Fax : 86-20-22307350
  • Address : Guangdong,Guangzhou,Room 201, Second floor, No. 59 of Road Taoyuan, Tianhe district
  • Country/Region : China
  • Zip : 510660

battery tester equipment Lithium Ion Battery equipment

battery tester equipment Lithium Ion Battery equipment
Product Detailed
LCD display data download 32-88V 100A for 48V, 60V, and 72V English format

Technical Specifications:

Model XY-ZF32-88V-100A Automatic Battery Discharger has the following technical specifications:

1.Voltage Range:

DC32V-88V

2.Setting Range of Discharge Current:

0-100A

3.Current Regulation Step:0.1A
4. Current Measurement Accuracy:

1%

5.Voltage Measurement Accuracy:1%
6.Timing Range:

 0-15 hours

7. Cooling Means:forced cooling
8. Ambient Temperature-10°C to 50°C
9.Ambient Humidity:20%-80%
10.Operational Power Supply:AC220V±15% at 50±5Hz
11. External Dimensions:605×300×550(mm)(LxWxH)
12. Weight:38Kg

    

Key Functions and Features:

 

1.      Microprocessor control, LCD, English menu, real-time display of test data

  (e.g., voltage, current, discharge initiation time and length, capacity, lower limit of voltage protection) and instant information of running state.

2.      Keypad operation

It allows to set discharging parameters and input operation commands through the keypad or the host computer. 

3.      Automatic protection

  Once the battery discharging time or discharge capacity is set, the discharging process will stop automatically and give an alarm when the batteries voltage is lower than the preset protective voltage or any abnormal load connection is detected; at the same time, the shutdown conditions will be logged automatically. 

4.      Power-down feature

  In case of unexpected power failure, the discharge process will be automatically suspended harmlessly to the discharger until the power is resumed; in the meantime, the preset discharge parameters and discharge data will be saved automatically.

5.      Data collection

  To facilitate the analysis of batteries performance, the discharging data will be collected and saved at a high frequency in the first two minutes after the discharging process starts, and then the frequency goes down to once a minute.

6.      Data processing

  The test data is allowed to upload to the host computer via an RS-232 port or an USB port for the attached dedicated software to process and generate various graphs, bar charts or reports reflecting the battery performance, which may be magnified, retrieved or printed out. 

7.      Correction feature

The indicated voltage and/or current values may be corrected, whether prior to discharging or in the discharging process.

8.      Data storage

  It supports to automatically store the discharging data of eight successive cycles without missing datum at power outage, and the discharging time for each cycle is not more than 15 hours. 

9.      Power consumption component

  A new type of PTC is adopted with such features as safety, no pollution, compactness, light weight and good heat radiation.

10.  Voltage recognition

  The discharger is able to recognize the voltages and switch automatically.

battery tester equipment Lithium Ion Battery equipment



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.